O2 sensor was changed as emission light was on and the code was p0135.All is well now the sensor i bought was a cheap one from ebay,and had blown a fuse in the engine bay which had caused the problem of multiple fault codes.Thanks for responding anyways
↧
Sensor problems
↧
Knock Sensor Issue
Yes im afraid it is on the z16xe engines. You need to get it cleared and see if it returns. If it does then more tests will need to be done. Is the engine quiet when its running with NO tapping/knocking noises?
↧
↧
Sensor problems
Im glad its sorted but this is a warning about buying cheap ebay sensors. Its lucky it never spiked the ECU.
↧
Knock Sensor Issue
As far as we can tell the engine is running quiet. I used it yesterday to pick up the sensor and did hear a tapping noise, but not sure if this is because the engine is in limp mode. Only heard it the once whilst changing from 2nd to 3rd gear.
↧
Knock Sensor Issue
I think you need to get the codes cleared and take it from there. Im pretty sure with this code you need to clear the code before it will come out of limp home mode.
↧
↧
Knock Sensor Issue
Just to note: that the light only comes on when the car is moving. The light does not come on when the car is stationary (even with the revs revved up).
↧
Knock Sensor Issue
Hubby is trying to clear the codes now.
↧
Knock Sensor Issue
I assume he has a code reader! If not then even disconncting the battery wont work
↧
Knock Sensor Issue
OK, no joys with clearing the codes himself. Going to try and get someone with a diagnostic kit. Failing that, off the a garage we go I guess.
↧
↧
clutch pedal help
Unless this is a common problem with a Zafira, it sounds like dirt or a foreign object floating around in the system acting like a non-return valve at the wrong time. A common problem in hydraulics, although never come across this problem in a clutch system.
↧
zafira 03 emission light
If your eml has not come on do not worry bout the codes. regarding abs light. Its only a fail if it stays on. You need to read the codes from the abs module
↧
zafira 03 emission light
How can I read the codes from the abs module?
↧
zafira 03 emission light
If you connect opcom and follow these instructions
Diagnostics>
year>
Zafira A>
Chassis>
ABS 5.3/5.4 (+TC)
Fault codes> you fault codes will now be displayed for the ABS module.
You can also view live data from the module by using the measuring blocks.
This is what you can view and the status possibilities.
Battery Voltage,[V]
Brake Light Switch,Inactive 0V,Active 12V
FL Wheel Speed (Front Left),[km/h]
FR Wheel Speed (Front Right),[km/h]
RL Wheel Speed (Rear Left),[km/h]
RR Wheel Speed (Rear Right),[km/h]
Valve Relay Command,Inactive,Active
Valve Relay Feedback,Inactive,Active
Return Pump Relay Command,Inactive,Active,**PUMP**
Return Pump Feedback,Inactive,Active,**PUMPBACK**
FL ABS Valves Command (Front Left),Normal Braking,Hold Function,Bleed Function,Release Function
FL ABS Valves Feedback (Front Left),Normal Braking,Hold Function,Bleed Function,Release Function
FR ABS Valves Command (Front Right),Normal Braking,Hold Function,Bleed Function,Release Function
FR ABS Valves Feedback (Front Right),Normal Braking,Hold Function,Bleed Function,Release Function
RL ABS Valves Command (Rear Left),Normal Braking,Hold Function,Bleed Function,Release Function
RL ABS Valves Feedback (Rear Left),Normal Braking,Hold Function,Bleed Function,Release Function
RR ABS Valves Command (Rear Right),Normal Braking,Hold Function,Bleed Function,Release Function
RR ABS Valves Feedback (Rear Right),Normal Braking,Hold Function,Bleed Function,Release Function
Here are the possible fault codes and their descriptions for that module
C0035
-4 Front Left Wheel Sensor Open Circuit
-8 Left Front Wheel Speed Sensor Incorrect Signal
C0040
-4 Front Right Wheel Sensor Open Circuit
-8 Front Right Wheel Sensor Incorrect Signal
C0045
-4 Rear Left Wheel Sensor Open Circuit
-8 Rear Left Wheel Sensor Incorrect Signal
C0050
-4 Rear Right Wheel Sensor Open Circuit
-8 Rear Right Wheel Sensor Incorrect Signal
C0060
-4 Front Left Outlet Solenoid Valve Circuit Malfunction
C0065
-4 Front Left Inlet Solenoid Valve Circuit Malfunction
C0070
-4 Front Right Outlet Solenoid Valve Circuit Malfunction
C0075
-4 Front Right Inlet Solenoid Valve Circuit Malfunction
C0080
-4 Rear Left Outlet Solenoid Valve Circuit Malfunction
C0085
-4 Rear Left Inlet Solenoid Valve Circuit Malfunction
C0090
-4 Rear Right Outlet Solenoid Valve Circuit Malfunction
C0095
-4 Rear Right Inlet Solenoid Valve Circuit Malfunction
C0110
-2 Return Pump Circuit Voltage Low
-8 Return Pump Circuit Incorrect Signal
C0121
-0 Valve Relay Circuit Malfunction
-4 Valve Relay Circuit Malfunction
-8 Valve Relay Circuit Malfunction
C0141
-4 Front Right Traction Control Primary Solenoid Valve Circuit Malfunction
C0146
-4 Front Right Traction Control Switchover Solenoid Valve Circuit Malfunction
C0151
-4 Front Left Traction Control Primary Solenoid Valve Circuit Malfunction
C0156
-4 Front Left Traction Control Switchover Solenoid Valve Circuit Malfunction
C0161
-4 Brake Switch Circuit Open
C0236
-4 Engine Speed Malfunction
C0241
-4 Engine Torque Reduction Incorrect Signal
C0244
-4 Engine Torque Input No Signal
C0245
-1 Wheel Sensor Signal Circuit Out Of Nominal Range/Performance
-4 Wheel Sensor Signal Circuit Out Of Nominal Range/Performance
-8 Wheel Sensor Signal Circuit Out Of Nominal Range/Performance
C0256
-0 Engine Torque Reduction Malfunction
-4 Engine Torque Reduction Malfunction
-8 Accelerator Pedal Position Sensor Incorrect Signal
C0550
-0 Replace Electronic Control Unit (ECU)
C0551
-8 Variant Coding Traction Control (TC)
C0800
-2 Battery Voltage Out Of Range
U2103
-4 CAN-Bus Communication Malfunction
U2104
-4 CAN-Bus Reset Counter Overrun
Edited by marks152 - 14 hours 8 minutes ago at 9:52am
Diagnostics>
year>
Zafira A>
Chassis>
ABS 5.3/5.4 (+TC)
Fault codes> you fault codes will now be displayed for the ABS module.
You can also view live data from the module by using the measuring blocks.
This is what you can view and the status possibilities.
Battery Voltage,[V]
Brake Light Switch,Inactive 0V,Active 12V
FL Wheel Speed (Front Left),[km/h]
FR Wheel Speed (Front Right),[km/h]
RL Wheel Speed (Rear Left),[km/h]
RR Wheel Speed (Rear Right),[km/h]
Valve Relay Command,Inactive,Active
Valve Relay Feedback,Inactive,Active
Return Pump Relay Command,Inactive,Active,**PUMP**
Return Pump Feedback,Inactive,Active,**PUMPBACK**
FL ABS Valves Command (Front Left),Normal Braking,Hold Function,Bleed Function,Release Function
FL ABS Valves Feedback (Front Left),Normal Braking,Hold Function,Bleed Function,Release Function
FR ABS Valves Command (Front Right),Normal Braking,Hold Function,Bleed Function,Release Function
FR ABS Valves Feedback (Front Right),Normal Braking,Hold Function,Bleed Function,Release Function
RL ABS Valves Command (Rear Left),Normal Braking,Hold Function,Bleed Function,Release Function
RL ABS Valves Feedback (Rear Left),Normal Braking,Hold Function,Bleed Function,Release Function
RR ABS Valves Command (Rear Right),Normal Braking,Hold Function,Bleed Function,Release Function
RR ABS Valves Feedback (Rear Right),Normal Braking,Hold Function,Bleed Function,Release Function
Here are the possible fault codes and their descriptions for that module
C0035
-4 Front Left Wheel Sensor Open Circuit
-8 Left Front Wheel Speed Sensor Incorrect Signal
C0040
-4 Front Right Wheel Sensor Open Circuit
-8 Front Right Wheel Sensor Incorrect Signal
C0045
-4 Rear Left Wheel Sensor Open Circuit
-8 Rear Left Wheel Sensor Incorrect Signal
C0050
-4 Rear Right Wheel Sensor Open Circuit
-8 Rear Right Wheel Sensor Incorrect Signal
C0060
-4 Front Left Outlet Solenoid Valve Circuit Malfunction
C0065
-4 Front Left Inlet Solenoid Valve Circuit Malfunction
C0070
-4 Front Right Outlet Solenoid Valve Circuit Malfunction
C0075
-4 Front Right Inlet Solenoid Valve Circuit Malfunction
C0080
-4 Rear Left Outlet Solenoid Valve Circuit Malfunction
C0085
-4 Rear Left Inlet Solenoid Valve Circuit Malfunction
C0090
-4 Rear Right Outlet Solenoid Valve Circuit Malfunction
C0095
-4 Rear Right Inlet Solenoid Valve Circuit Malfunction
C0110
-2 Return Pump Circuit Voltage Low
-8 Return Pump Circuit Incorrect Signal
C0121
-0 Valve Relay Circuit Malfunction
-4 Valve Relay Circuit Malfunction
-8 Valve Relay Circuit Malfunction
C0141
-4 Front Right Traction Control Primary Solenoid Valve Circuit Malfunction
C0146
-4 Front Right Traction Control Switchover Solenoid Valve Circuit Malfunction
C0151
-4 Front Left Traction Control Primary Solenoid Valve Circuit Malfunction
C0156
-4 Front Left Traction Control Switchover Solenoid Valve Circuit Malfunction
C0161
-4 Brake Switch Circuit Open
C0236
-4 Engine Speed Malfunction
C0241
-4 Engine Torque Reduction Incorrect Signal
C0244
-4 Engine Torque Input No Signal
C0245
-1 Wheel Sensor Signal Circuit Out Of Nominal Range/Performance
-4 Wheel Sensor Signal Circuit Out Of Nominal Range/Performance
-8 Wheel Sensor Signal Circuit Out Of Nominal Range/Performance
C0256
-0 Engine Torque Reduction Malfunction
-4 Engine Torque Reduction Malfunction
-8 Accelerator Pedal Position Sensor Incorrect Signal
C0550
-0 Replace Electronic Control Unit (ECU)
C0551
-8 Variant Coding Traction Control (TC)
C0800
-2 Battery Voltage Out Of Range
U2103
-4 CAN-Bus Communication Malfunction
U2104
-4 CAN-Bus Reset Counter Overrun
Edited by marks152 - 14 hours 8 minutes ago at 9:52am
↧
↧
hi all
hi all
iv just bought a 52 plate zafira gsi turbo in arden blue and love it its got loads of kick in it its got 94000 miles on her but with full service history it all sounds and drives lovly but just thought id say ello and ask if there might be a few things i should look out for. il have a good read of this forum for coman pobs and stuff
↧
hi all
i should say as well im newish to vauxhalls i had a cavalier about 10 years ago lol
↧
hi all
Welcome and ask away.
↧
Newbie from Indonesia
I will take some pictures and post some dimensions in the morning, are you fitting a motorized or manual unit ? An interesting project either way.
↧
↧
Cd 30 Not Responding
hi,
for a while now our Cd 30 stereo is on the blink, it doesent seem to respond to button pushes. sometimes it rights itself and is fine for a few days then it gets stuck on a particular station and no button presses respond, no matter what is pushed, only power on/off. it also affects the steering controls and they do the same thing????
i've tried google and came to no avail, i removed fuse and put it back again but still no change??
im baffeled, i hope its not too serious, i dont think i have the code, how many letters are in a "code" as there is a 6 digit number written on the info card but does not say its the code??
would greatly appreciate any help or direction with the matter.
Thanks in Advance
↧
Cd 30 Not Responding
My code is 4 digits. It sounds as if a button is stuck and will not therefore respond to another input until the previous one is released ?
↧
Cd 30 Not Responding
thanks for reply, ok so i can say i dont have my stereo code![Cry]( "Cry")
i have tried every button and all seem to be moving freely, can i take off the face of the stereo to check pads behind buttons?
↧