Author: marks152
Subject: wont start
Posted: 13 July 2013 at 9:16am
Try holding the brake pedal, press accelerator right down. turn the igntion on, keep pedals pressed (dont try start it), watch the spanner light, It will flash. You need a pen and paper to right down the sequence. All codes are 4 digits.
example 10,2,10,3 = 0203 1,6,1,2 = 1612
Try it and post back the codes. Usually if it was an immobiliser issue you would have a flashing spanner light. If its not flashing then the chips been programmed correctly.
Subject: wont start
Posted: 13 July 2013 at 9:16am
Try holding the brake pedal, press accelerator right down. turn the igntion on, keep pedals pressed (dont try start it), watch the spanner light, It will flash. You need a pen and paper to right down the sequence. All codes are 4 digits.
example 10,2,10,3 = 0203 1,6,1,2 = 1612
Try it and post back the codes. Usually if it was an immobiliser issue you would have a flashing spanner light. If its not flashing then the chips been programmed correctly.