Author: Mikezafira
Subject: Intake leak
Posted: 01 May 2013 at 9:40pm
Hi. Advise needed please. Engine is 1.9 DTH . I have 2279 dtc showing and have removed and cleaned the egr which is now ok. Cleared the dtc and the car was fine for a couple of days then the light came on and same code is back. Im now thinking maybe the swirl valve bearings are worn but is there a way of checking before i strip the inlet off. The swirl valve rod seems to be working ok. Movement seems good and rod is connected properly.
Freeze frame data shows problem occurs at low revs about 1500 rpm if this helps.
Thanks
Mike
Edited by Mikezafira - 8 hours 4 minutes ago at 9:56pm
Subject: Intake leak
Posted: 01 May 2013 at 9:40pm
Hi. Advise needed please. Engine is 1.9 DTH . I have 2279 dtc showing and have removed and cleaned the egr which is now ok. Cleared the dtc and the car was fine for a couple of days then the light came on and same code is back. Im now thinking maybe the swirl valve bearings are worn but is there a way of checking before i strip the inlet off. The swirl valve rod seems to be working ok. Movement seems good and rod is connected properly.
Freeze frame data shows problem occurs at low revs about 1500 rpm if this helps.
Thanks
Mike
Edited by Mikezafira - 8 hours 4 minutes ago at 9:56pm